Mirror Adjust Menu in MFA
For 2011s and up. Apparently 2010s will have this menu.
How-To
WARNING: I will not be held liable if anything occurs when attempting to change anything in the VCDS software. These instructions are created to the best of my knowledge and are as accurate as I can make them. Please be careful before you save your settings and always run Auto-Scan before any changes are attempted.
Load up VCDS, click on the
Select button under
Select Control Module
Click on the
09-Cent. Elect. button
Click on the
Coding - 07 button
Click on the
Long Code Helper button
Go to
Byte 8 and check
Bit 6 - Synchronized Mirror Adjustment
You will now have
Mirror Adjust in your
Convenience sub-menu. If you continue deeper into the menus, you will see
Both and
Individual, referring to adjusting your side mirrors simultaneously or one at a time depending on which side mirror you select.
