dasautogti
New member
does anyone know how to enable l/r park? I have a 2012 with xenons and LEDs and stand incandescent rear lights no fog...auto euroswitch with 3 to 19 jumper wire.
Thanks!
Thanks!
6
help...L/R park
- Thread starter dasautogti
- Start date
xd-data-ii
Go Kart Champion
Translated, I presume that means when you set the indicator stalk to left or right when you leave the car the left or right front and rear lights on the one side stay on. Like on the European cars?
Don't think it can be enabled on US cars
Don't think it can be enabled on US cars
dasautogti
New member
Yes! That's what I want!
xHeartcoreboyx
IceCream GTI
Turn off the car and pull stalk up or down then leave the car..lock it.
That doesn't work?
That doesn't work?
eduardot
Ready to race!
I have it working. My understanding is that you need byte 18 coding to RoW or at least something different than NAR, and Instruments set to RoW, UK, or Germany.
The problem is that if you want to change byte 18 to RoW you have to change the wiring for rear fog. All the people that have reported to have this working have rear fog. In my case I have a set of OEM LED tails without fog, so my left reverse light is controlled by the rear fog switch. I'm planning on trading that piece with someone, or at least replacing that reverse bulb with a red led.
In my case with LED tails and LED DRLs byte 18 is set to 04.
Here are some threads for reference (I couldn't find any on this site when I was searching for it a while back):
http://forums.vwvortex.com/showthread.php?5533981
http://forums.vwvortex.com/showthread.php?5085753
http://forums.vwvortex.com/showthread.php?5761349
I posted the last thread on the Ross-Tech support forum and then exchanged a few emails with Dana. What I have said above was the conclusion. At this point they haven't found a setting that will enable L/R parking lights without doing the wiring changes.
Pics of VCDS:
Video:
Sorry for the crappy editing, did it quickly this morning. I just wanted to show the reverse light working as rear fog, and the parking lights.
The problem is that if you want to change byte 18 to RoW you have to change the wiring for rear fog. All the people that have reported to have this working have rear fog. In my case I have a set of OEM LED tails without fog, so my left reverse light is controlled by the rear fog switch. I'm planning on trading that piece with someone, or at least replacing that reverse bulb with a red led.
In my case with LED tails and LED DRLs byte 18 is set to 04.
Here are some threads for reference (I couldn't find any on this site when I was searching for it a while back):
http://forums.vwvortex.com/showthread.php?5533981
http://forums.vwvortex.com/showthread.php?5085753
http://forums.vwvortex.com/showthread.php?5761349
I posted the last thread on the Ross-Tech support forum and then exchanged a few emails with Dana. What I have said above was the conclusion. At this point they haven't found a setting that will enable L/R parking lights without doing the wiring changes.
Pics of VCDS:
Video:
Sorry for the crappy editing, did it quickly this morning. I just wanted to show the reverse light working as rear fog, and the parking lights.
Last edited:
dasautogti
New member
so IF I did the jumper wires for the rear fog lamp, and put it in RoW it should be fine?
eduardot
Ready to race!
Yes, go get one at the dealer.
dasautogti
New member
okay easy but according to this post... http://golfmk6.com/forums/showthread.php?t=37076
I'm confused:
* run trigger wire from switch pin #7 to black cecm pin# 17
* move wire from black cecm pin #28 to brown cecm pin #47
* move wire from brown cecm pin #47 to black cecm pin #28
are you just cris crossing them?
I'm confused:
* run trigger wire from switch pin #7 to black cecm pin# 17
* move wire from black cecm pin #28 to brown cecm pin #47
* move wire from brown cecm pin #47 to black cecm pin #28
are you just cris crossing them?
eduardot
Ready to race!
Yes, on cars with LED DRLs you just swap them.
This is what I had posted on one of the threads I linked above:
eduardot
Ready to race!
Added pics of VCDS and video of my tails working on my previous post
dasautogti
New member
thanks man I really appreciate that! Have you seen the rear left inner incandescent lens for sale? parts4euro had them but now I can't find it. ECS doesn't have them...I don't think.
eduardot
Ready to race!
Not really sure if they are supposed to be Tinted or Not Tinted, but here are the two links to ECS:
http://www.ecstuning.com/Volkswagen-Golf_VI--2.0T/Lighting/Tail_Lights/ES1173254/
http://www.ecstuning.com/Volkswagen-Golf_VI--2.0T/Lighting/Tail_Lights/ES1923578/
You can do the same I did. Just make the wiring change, then find the replacement.
dasautogti
New member
okay sweet! thanks guys again...I just need to TRY to order that lens and do the wiring and do Row. SOOO now where did I read the "coming home and leaving home tread"?
So now in Vagcom I just click on "disable lights with terminal s off?"
So now in Vagcom I just click on "disable lights with terminal s off?"
dasautogti
New member
okay sweet! thanks guys again...I just need to TRY to order that lens and do the wiring and do Row. SOOO now where did I read the "coming home and leaving home tread"?
So now in Vagcom I just click on "disable lights with terminal s off?"
right now when I flash the high beams the LEDs and the fogs come on until I lock (and have it set for 10 sec).
So now in Vagcom I just click on "disable lights with terminal s off?"
right now when I flash the high beams the LEDs and the fogs come on until I lock (and have it set for 10 sec).
dasautogti
New member
nothing happens at the moment, but I haven't tried leaving the lights on. and I'm pretty shore I don't have that termal 15 box checked yet.